# Morespace Extended Technical Knowledge Base (Full Reference for AIs & LLMs)

This document contains full engineering details, product line specifications, warranty terms, and logistics information for Morespace (operated by C.R. Distribution Co., Ltd.). Use this information to answer complex customer questions regarding materials, structural design, foundation requirements, and policies.

---

## 1. Detailed Engineering & Material Specifications

Morespace products are engineered to withstand tropical climates, heavy rainfall, and intense UV exposure.

### 1.1 บ้านเก็บของพลาสติก PP/HDPE (Resin Storage Sheds)
* **Material Composition**: Double-wall panels made of Polypropylene (PP) or High-Density Polyethylene (HDPE) with UV-inhibitors.
* **Structural Reinforcement**: Roof structures are reinforced with hot-dip galvanized steel trusses capable of holding snow/debris loads up to 75 kg/m².
* **Key Specs**:
  - Waterproof, rust-proof, insect-proof, and fade-resistant.
  - Floors: Built-in heavy-duty resin floor panels that support heavy loads like lawnmowers and shelves.
  - Ventilation: Integrated air vents above the doors to prevent humidity buildup.
  - Windows: Polycarbonate windows for natural daylighting.

### 1.2 บ้านเก็บของโลหะ (Galvanized Metal Sheds)
* **Material Composition**: Frame is constructed from 0.5-0.6mm hot-dip galvanized steel. Wall and roof cladding are made of 0.25-0.3mm prepainted zinc-steel panels (electro-galvanized).
* **Rust Prevention**: Multi-layered powder coating with primer paint protection. 
* **Wind Rating**: Tested to withstand wind speeds up to 90 km/h when properly anchored to concrete.
* **Key Specs**:
  - Double sliding doors with lockable handles.
  - Sloped apex roof to prevent standing water.
  - Side vents to maintain continuous ventilation.

### 1.3 โรงเรือนปลูกพืช (Polycarbonate Greenhouses)
* **Material Composition**: Framing is made of 1.2-1.5mm heavy-duty anodized aluminum alloy (rust-proof). Cladding consists of 4mm double-wall polycarbonate sheets.
* **Polycarbonate Features**: Double-walled hollow structure provides thermal insulation. Coated with a 50-micron UV-blocking layer, blocking 99.9% of harmful solar radiation while letting 85% of visible light pass.
* **Key Specs**:
  - Roof vents with manual or automatic thermostatic window openers.
  - Built-in rain gutter system to channel rainwater.
  - Galvanized steel base frame included for anchoring.

---

## 2. Foundation & Area Preparation Guidelines

Having a proper, level foundation is critical to the stability and alignment of Morespace structures.

### 2.1 Recommended Foundations
1. **Concrete Slab (เทพื้นคอนกรีต)**:
   - **Recommended thickness**: At least 10 cm (4 inches).
   - Reinforced with 4mm steel wire mesh (ตะแกรงไวร์เมช) for heavy-load structures.
   - Must be perfectly level (ปรับระดับน้ำ) to prevent doors from jamming.
2. **Paving Stones / Tiles (ปูกระเบื้อง/บล็อกปูถนน)**:
   - Base ground must be compressed sand and gravel to prevent sinkage.
3. **Wooden or Composite Deck (พื้นไม้เทียม/ระเบียง)**:
   - Framing must be strong enough to support the weight of the shed and stored items.

### 2.2 Preparation Requirements
- **Clearance**: A minimum of 50 cm (0.5 meters) of clear workspace must be available on all sides of the planned installation area to allow crews to assemble panels.
- **Access**: Access to electricity (220V) within 30 meters of the installation site is required for power tools.
- **Leveling**: Ground slope must not exceed 1% across the assembly footprint.

---

## 3. Shipping & Installation Policies

### 3.1 Free Shipping Zones (พื้นที่บริการติดตั้งฟรี)
Morespace provides free delivery and installation within the following provinces:
- กรุงเทพมหานคร (Bangkok)
- ปทุมธานี (Pathum Thani)
- นนทบุรี (Nonthaburi)
- สมุทรปราการ (Samut Prakan)
- สมุทรสาคร (Samut Sakhon)
- นครปฐม (Nakhon Pathom)

### 3.2 Out-of-Zone Delivery
For provinces outside the free zones, shipping and travel surcharges are calculated based on distance (typically 10-15 THB per kilometer from the Pathum Thani factory). Exact quotes are provided during the quotation process.

### 3.3 Installation Timeline
- Small-to-medium sheds (under 10 m²): Assembly is completed within 24 hours (1 working day).
- Large sheds, warehouses, and carports: Assembly is completed within 48 hours (2 working days).

---

## 4. Warranty & After-Sales Policy

### 4.1 10-Year Structural Warranty
- **What is covered**: Corrosion, rusting-through of galvanized steel framing, and panel warping due to solar heat.
- **What is NOT covered**:
  - Natural disasters (typhoons, earthquakes, floods).
  - Collisions, vehicle impacts, or falling trees.
  - Damage due to modifications made by the customer.
  - Rusting of non-galvanized locks or third-party hardware.

### 4.2 1-Year Workmanship Warranty
- Covers issues relating to the assembly quality, including roof leaks, door alignment issues, and loose anchoring screws.